• 2pcs UNO R3 ATmega328P CH340 Compatible Development Board UNO R3 Arduino Kit for Arduino Starter

    2pcs UNO R3 ATmega328P CH340 Compatible Development Board UNO R3 Arduino Kit for Arduino Starter

    Price:   $9.99

    • Model: UNO-0004-MFN
    • 99875 Units in Stock
    • Manufactured by: Treedix

    Store Quantity Discount Policy

    5 - 1910%
    20 - 4915%
    50 - 9920%
    100 - 19925%
    200 + 30%
    * The way the Order Total modules work is that they show up at checkout time
    (complete orders today,deliverd around 02/12/2021)


    1.  The Uno is a microcontroller board based on the CH340.It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
    2. This is an UNO R3 Arduino-compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible to Arduino, works with the software at arduino.
    3. This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit.
    4. Friendly: UNO R3 development board is easy to use for Arduino starter, It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
    5. We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!

    1. Increase the pin socket, to facilitate the use of DuPont line
    2. Microcontroller: ATmega328
    3. Operating Voltage: 5V
    4. Input Voltage (recommended): 7-12V
    5. Input Voltage (limits): 6-20V
    6. Digital IO Pins: 4 (of which 6 provide PWM output)
    7. Analog Input Pins: 6
    8. DC Current per IO Pin: 40mA
    9. DC Current for 3.3V Pin: 50mA
    10.Support ISP download function
    11. Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
    12. SRAM: 2 KB
    13. EEPROM: 1 KB
    14. Clock Speed: 16 MHz
    15.USB Chip: CH340G
    16.Cable length:1ft(30cm)
    18.Operating System Compatibility (tested by Vetco, using the CH340 Driver):
    Windows XP SP2, SP3
    Windows 7 (any version)
    Windows 8 and 8.1
    Windows 10 (may not be using the CH340 driver)
    MAC OSX 10.7.5 up to OSX 10.14.2 (you can try to install the CH341SER USB driver)
    Note: if you install the CH340 driver, Please contact us if you need the CH340 Driver. or You can also find the drivers yourself, please search for "CH340 drivers"

    Package Included:
    1 x UNO R3 ATmega328P CH340G Development Board
    1 x 40 Pin Header
    This item is just an Arduino UNO compatible Microcontroller - It is not the official Arduino branded board, and is supported by Treedix Electronics directly for warranty purposes.